|
| BB7
Beam Light |


|
|
The BB 7 beamlight (patent
pending) is a seven cell energy saving
beamlight consisting of seven narrow beam control (
10 degrees ). Seven customized light engines provided
an homogenized RGB output with no colour separation.
A fresh look from an led fixture, the bb 7 is completely self contained
device rated at 210 watts, drawing 0.9 amps at 240 volts! Super fast,
super smooth control is possible due to a 16 bit fine resolution dmx
input.
Up to ten different modes of operation give the user a variety of
control options, from simple RGB control of all the cells through to
strobe and master control, in both 8 bit and 16 bit options.
The user interface clearly shows the fixtures operating mode and allows
for a very quick dmx address setup.
A combined power and data connection makes multiple cable hook up easy
with an output link provided within the fixture design.
The fixture comes with a quick release camloc mounted yoke as standard.
Other rigging accessories further extend the possibilities in multiple
fixture configurations.
|
| Features: |
- Energy
efficient additive colour mixing and static colour device
- Customised
lamina Titan RGB LED x 7
- Efficient
heat dissipation of both led heat and control section
- Self
contained device .
- Built in
user interface for additional functionality
- Built in
functions for dmx use and stand alone use
- A
variety of different operating modes are provided for differing
applications
- Super
fast strobe from constant on to a slow pulse, colour oscillations are
possible
- Ten
degree beam angle as standard
- Optional
accessory slot for adding 'top hat style secondary glare reducer.
- 16 amp
and 5 pin XLR input accessory cable supplied
- Easy
single cable connection via 1.5 metre power and data
input
- Chassis
mounted combined power and data output for daisy chaining adjacent
units 16amps max
- Stand
alone function provides memory storage
- A stand
alone chase sequence of using specified memories
- Outputs
dmx to other fixtures within the same dmx range
- Auto
ranging power input 100v to 240 volts, ideal for touring globally
- Dual
safety points provided as standard
- Flightcase
packages available along with accessories
|
|
|
| BB4 Washlight |
|
The BB 4 washlight is a powerful led
fixture with a new generation of combined RGB high power leds with
homogenised output. Designed for a life on tour and packed full of
control versatility and rigging/ de-rigging simplicity. This fixture
can be used outdoors as well as indoor in fixed installations or
travelling around the world.
Filtering
processes waste energy by their very nature; additive colour mixing as
used with the BB washlight series, works on drawing only the power
required. So in blackout the device only consumes a total of nine
watts, on full power this equates to 120 watts maximum power draw.
The Light Engines: 4 custom
lamina combined RGB leds use groundbreaking thermal performance. A key
factor in determining life and reliability. Unmatched by any other
manufacturer, Laminas light engines are used to deliver the light you
would expect from a new generation led fixture.
The
unique optical path ensures a completely blended source leaves the
fixture, ideal as a wash device or direct view. The four light engines
are fitted to a substantial passive heatsink with the shortest gap
between silicone die to heatsink, making this fixture one of the best
thermally managed led fixtures available.
Colour
consistency comes from a demanding colour specification with tight
wavelength tolerances to ensure the lighting designer has the right
primary colours to achieve colours in the billions including a variety
of whites.
|
| Features: |
- Energy
efficient additive colour mixing and static colour device
- Customised
lamina Titan RGB LED x 7
- Efficient
heat dissipation of both led heat and control section
- Self
contained device .
- Built in
user interface for additional functionality
- Built in
functions for dmx use and stand alone use
- A
variety of different operating modes are provided for differing
applications
- Super
fast strobe from constant on to a slow pulse, colour oscillations are
possible
- 4 x 20
beam angle as standard
- Accessory
slot for optical accessories such as asymmetric beam
adjuster
- Easy
connect of data with 5pin xlr’s from supplied splitters
- Easy
power input and output for daisy chaining adjacent units 16 amps max
from splitters provided
- Combined
data and power cable chassis connections for tidy single cable
setups
- Stand
alone function provides memory storage
- A stand
alone chase sequence of using specified memories
- Outputs
dmx to other fixtures within the same dmx range
- Auto
ranging power input 100v to 240 volts, ideal for touring globally
- Dual
safety points provided as standard
- Flightcase
packages available along with accessories
|
|


|
|
|
|
| BB1 and
PowerBar
|

|
Building
upon the BB4 and BB7, the new BB1 Building
Block System creates exciting
and innovative new opportunities going far beyond the semi-rigid
constraints of
normal fixture specification.
The BB 1 series is designed around three basic components,
(1) A
weatherproof (submersible) low voltage (15
volt) fixture
This comes with a self contained RDM/DMX digital drive. It can be
submerged and
comes with a single cable fitted with a high quality 5-pin weatherproof
connection.
The BB1 can be used independently, e.g. as a truss or a set toner. It
is fitted with a
dual set of yokes for easy floor mounting or for quick, tool free
rigging onto a truss or
metalwork in the air. The BB1 fixtures can be remotely addressed and
configured with industry standard
RDM (remote device management) DMX, or run as a slave on standard USITT
DMX.
i-Pix new Digital Drive technology is over 90% efficient and delivers
even smoother
control of the light engines, right down to lowest intensities. True 16
bit control
expands the colour range from millions to billions.
(2) Power distribution box
This remotely address the fixtures via RDM/DMX, or the onboard user
interface can
be used which provides both operating mode and address control.
Combined power and data input ensures a weatherproof connection, so the
power
distro can be used outdoors in any orientation.
A battery and data inlet connects to an optional battery and show DMX
wireless
DMX module. Rigging mounts are provided for truss or frame mounting,
(3) Multiple rigging frames:
These are based upon i-Pix' standard Camloc quick release systems for
easy rigging
and de-rigging of multiple configurations with power and data onboard.
Each fixture's
position can be adjusted with sliding frame rigging mounts. Multiple
points enable
quick adaption from being hung or rigged from a yoke in the
conventional sense, or
grouped together as a low resolution high power pixel grid.
Various rigging frames are available - and i-Pix is initially launching
three rigging
frame choices for the clustering of BB1 fixtures.
|
| Features: |
- A 4-way
linear frame which can be floor
or rig mounted, or stood on end. This
frame matches existing BB4s in terms of spacing and light performance.
- A 3-way
T-frame with a shrunk down power distro box for an
even more
compact form factor.
- A 2 x 2
frame as above.
Other frame styles are currently in development, and will give even
more custom
design opportunities using standard components from the i-Pix building
block
system.
|
|
|
4
and 6
Lamp Power Bars for BB1
This is
ideal for all types of portable applications from film & TV
shoots and location work to small stages live concerts and
performances, site-specific theatre, exhibitions and conferences,
etc.
The
Power Bar provides low voltage to the BB1 and is equipped with an
onboard user interface. This allows each fixture to be individually
addressed and the 'operating' mode to be adjusted. Both power and data
are fed neatly through a combined data/LV power cable.
The user
interface will receive and transmit either 8 or 16 bit DMX to the
fixtures, and will run in stand-alone mode - whereby up to 20 memories
can be stored, and a chase created from these.
The
Power Bar is fitted with Camlock mounts for connecting to the Omega
bracket on the BB1 unit, to facilitate quick and easy truss or boom
rigging. As well as these suspension points, there is a centrally
located spigot position for rigging onto stands of all types.
Combined
power and data in and outs are useful for feeding multiple Power Bars
from a single power/data feed.
A tough
(optional) rain cover is available for outdoor use, and the Power Bar
is also fitted with a connection for the attachment of a remote battery
and wireless DMX facility.
|
|

|
|
| Battery
Bags
|
The new new waterproof Battery Bag uses standard 12
volt batteries and provides complete stand-alone flexibility where
power or lack of rigging time are issues. The Battery Bag can be used
to power either a single BB4 fixture or the Power Bars individually.
Each bag comes with the option of wireless control, courtesy of City
Theatrical, which also provides a local DMX outlet for other technology
that might be adjacent to the Power Bars. Runtime is a 35 hour life for
an RGB chase, 16 hours life for a CYM chase (with two colours on at
once) and 9 hours for full intensity - measured using a BB4.
|
|
| Satellite
|



|
|
i-pix
Satellite is a 42 Watt RGB self-contained LED wash
fixture with power and data daisy-chaining ability, and the potential
of running up to 60 fixtures off a single 16 Amp feed.
- Ultra
smooth dimmer response
- punchy
light output
- virtually
zero heat emission
- Easy-to-read
LCD for easy address and set up
- Flicker
free operation for all types of use
Users
can also utilise the onboard software to create their own internal
chase sequences when used in stand alone mode. The Satellite has two
camloc fittings allow i-pix's top hat scaffold and tv spigot mount to
be easily added, making the fixture work in the air and on the floor
quickly.
i-pix satellite is
a very versatile, ‘hirable’, engineer friendly led
fixture.
A small
range of accessories from flightcases to beam shaping clip on frames
provide the user with a range of possible uses.
A strong, tourable mechanical design provides for a durable
‘workhorse’ colour changing fixture exceptionally
easy to setup and run as part of a rig or on its own.
The
first production batch Satellites went straight out on tour with
Radiohead (LD Andi Watson) and Beautiful South (LD Dave Byars) .....
Indicating a real confidence in the product. Since then they have been
deployed worldwide on many productions.
|
| Features: |
- Energy
efficient additive colour mixing and static colour device
- Customised
lamina Titan RGB LED x 7
- Efficient
heat dissipation of both led heat and control section
- Self
contained device .
- Built in
user interface for additional functionality
- Built in
functions for dmx use and stand alone use
- A
variety of different operating modes are provided for differing
applications
- Super
fast strobe from constant on to a slow pulse, colour oscillations are
possible
- 4 x 20
beam angle as standard
- Accessory
slot for optical accessories such as asymmetric beam
adjuster
- Easy
connect of data with 5pin xlr’s from supplied splitters
- Easy
power input and output for daisy chaining adjacent units 16 amps max
from splitters provided
- Combined
data and power cable chassis connections for tidy single cable
setups
- Stand
alone function provides memory storage
- A stand
alone chase sequence of using specified memories
- Outputs
dmx to other fixtures within the same dmx range
- Auto
ranging power input 100v to 240 volts, ideal for touring globally
- Dual
safety points provided as standard
- Flightcase
packages available along with accessories
|
|
|
|